Description
ITS-200VD3pro 200 kW Modular Commercial Heat Pump System
The ITS-200VD3pro is configured as four ITS-50VD3pro 50 kW commercial heat-pump modules installed side by side. This modular configuration provides a total rated heating capacity of 200 kW while retaining the handling, serviceability and redundancy advantages of separate 50 kW units.
ITS officially publishes its current 200 kW commercial solution as a 4 × 50 kW modular system. This approach makes the individual units easier to transport and position while allowing the remaining modules to continue operating if one unit requires maintenance.
200 kW Total Heating Capacity
Each ITS-50VD3pro module is rated at 50 kW, giving the four-module system a combined rated heating capacity of 200 kW. With each PRO module listed at 10.1 kW typical input, the combined typical input is approximately 40.4 kW.
Very High Hot-Water Production
Each ITS-50VD3pro module is listed at approximately 1,031 litres per hour of hot-water production under the applicable test conditions. Four modules therefore provide a combined nominal production figure of approximately 4,124 litres per hour, subject to ambient conditions, inlet-water temperature, required outlet temperature and system design.
Three-Phase Modular Commercial Design
Each module uses a 380-415 V / 3N / 50 Hz supply. The electrical installation must be engineered for four independent commercial heat pumps, including correct isolation, protection, cable sizing and staged operation.
Vertical Air Discharge
Each ITS-50VD3pro uses a vertical-discharge dual-fan arrangement. The installation must maintain suitable airflow and service clearances around all four modules and prevent recirculation of discharged air.
GSM / Mobile-Network DTU Remote Monitoring
The PRO modules use DTU remote-monitoring functionality over a mobile network. This provides remote operational visibility and app-based monitoring, which is particularly useful for large commercial hot-water plants.
Redundancy Advantage
The four-module arrangement offers excellent redundancy. If one 50 kW unit is unavailable, the remaining three modules can continue operating with approximately 150 kW of remaining rated heating capacity.
Technical Specifications
| System model | ITS-200VD3pro |
|---|---|
| Configuration | 4 × ITS-50VD3pro modules side by side |
| Total rated heating capacity | 200 kW |
| Heating capacity per module | 50 kW |
| Power supply | 380-415 V / 3N / 50 Hz per module |
| Combined typical input power | 40.4 kW |
| Combined running current | 96.8 A nominal (4 × 24.2 A) |
| COP | Up to 4.96 per module |
| Casing | Metal |
| Air discharge | Vertical per module |
| Remote monitoring | GSM/mobile-network DTU per module |
| Refrigerant | R410A per module |
| Compressor | Copeland ZW scroll compressor per module |
| Combined hot water generated | Approximately 4,124 L/h |
| Maximum water temperature | 60°C |
| Water connection | 1.5 inch per module |
| Noise level | 61 dB(A) per module; total installation noise is site-dependent |
| Module dimensions | 1830 × 880 × 1900 mm each |
| Combined module weight | 1,600 kg |
| Display | 5-inch colour display per module |
| Warranty | Limited extended 5-year warranty per module |
Commercial System Design
This is a large commercial hot-water plant and should be professionally engineered. The design should address storage capacity, peak demand, circulation, staged operation, hydraulic balancing, electrical supply, water flow, pipe sizing, isolation, controls, service clearances, condensate drainage, structural support and maintenance access.
Important Model Note
ITS currently publishes its official 200 kW system as 4 × 50 kW modules. A separate current manufacturer datasheet specifically titled ITS-200VD3pro was not located. This product record therefore uses the official ITS modular-system configuration together with exact ITS-50VD3pro module specifications. Only values that genuinely add together have been totalled.
Reviews
There are no reviews yet.