Skip to main content
Need plumbing help? Speak directly to our team 24/7.

Solar Geyser Conversion Kit Cost South Africa: 2026 Guide

If you already own an electric geyser, the solar geyser conversion kit cost in South Africa is easier to pin down than a full replacement. Apollo kit prices run from…

Call 067 895 4361 Request a Free Quote
Solar Geyser Conversion Kit Cost South Africa: 2026 Guide

If you already own an electric geyser, the solar geyser conversion kit cost in South Africa is easier to pin down than a full replacement. Apollo kit prices run from around R11,825 for the 100L to around R19,482 for the 300L. Your installer’s quote sets the all-in figure, because labour, pipework and electrical work sit on top of the kit.

This guide stays with the kit route. It shows what each size costs, what the kit does and doesn’t cover, and when you’re better off buying a complete unit. If you want the replace-everything route, we cover full solar geyser installation costs separately.

What Converting an Electric Geyser to Solar Involves

A conversion keeps your existing electric tank and adds solar heating components to it. The tank you own stays in service, so the decision starts from that geyser, not from a new unit.

Each Apollo kit on the site is framed as a retrofit for someone who already has a compatible electric geyser of the matching size. It is not a replacement for a geyser that is past its life.

That framing limits who a kit suits. If your tank leaks, is the wrong size or is badly aged, a conversion keeps that same weak tank working, and you would be paying to solarise a problem.

Convert to solar and the sun does part of the heating, with the electric element left to cover the gaps. The aim is to cut the water-heating share of your electricity bill, which is usually one of the largest single items for a household.

Solar Geyser Conversion Kit Cost by Size: Apollo 100L to 300L

Kit prices step up with tank capacity, and the jump from 200L to 300L is the biggest. The figures below come from the product listings.

300L high-pressure solar geyser

Apollo Conversion Kit Price for Each Size

These are approximate prices, and they move. Treat each product page as the place to confirm the current figure.

  • 100L High Pressure Solar Geyser Conversion: around R11,825. See the 100L Apollo conversion kit.
  • 150L High Pressure Solar Geyser Conversion: around R13,451. See the 150L conversion kit.
  • 200L High Pressure Solar Geyser Conversion: around R15,449. Details are on the 200L product page, linked in the comparison below.
  • 300L High Pressure Solar Geyser Conversion: around R19,482. See the 300L conversion kit for large tanks.

Those are kit prices only. Think of them as the price of the solar hardware, not the price of a finished job.

Matching the Kit to Your Existing Geyser

Kit choice follows the capacity and compatibility of the tank you already have, and household size comes second. A family of five with a sound 150L geyser needs the 150L kit, not the 200L one, because the kit is built to work with a tank of its own size.

Read the capacity from the rating label on the geyser itself. It is usually a sticker or plate on the tank body, and it is more reliable than memory or an old invoice.

The kits are high-pressure, so your existing geyser also has to suit a high-pressure setup. If you aren’t sure of your tank’s pressure type, an installer can confirm it on a site visit before you buy anything.

If you are unsure whether your current capacity even fits your household, read how to choose a solar geyser size first. Then check that the answer matches a tank you can actually convert.

What a Conversion Kit Covers and What a Full Quote Adds

The kit price is one line in your budget. The quote an installer writes is the whole bill, and the gap between the two surprises many first-time buyers.

What Each Apollo Kit Includes

We can only name what each listing states. The 300L listing names a solar collector and a manifold, and the 100L listing refers to solar heating components added to the existing geyser.

Parts lists differ by listing, so open the product page for your size and read the full list before you compare it with an installer’s quote. Don’t assume that one kit’s contents match another’s.

A kit does not replace your tank. It also does not include the installer’s time, so a kit alone leaves you with boxes on the driveway, not hot water.

What a Full Quote Typically Adds to the Kit Price

A realistic conversion budget usually has four extra lines on top of the kit:

  • Installer labour, which covers the site work and commissioning.
  • Pipework and fittings to link the collector to your existing tank.
  • Electrical work and its certificate, because the geyser’s electrics are checked and signed off as part of the job.
  • Repairs to the existing geyser, if it needs anything before it can be reused.

The repair line is the one you can’t predict from your armchair, which is why the site check matters so much. A tank that needs a new part before conversion adds cost, and a tank that can’t be saved turns the job into a replacement.

Solar Conversion Kit vs New Solar Geyser: Retrofit or Full Replacement

Installers usually check capacity, pressure type and tank condition before they quote a conversion. A mismatch on any of the three tends to point toward a different kit, a repair or a full replacement.

When a Retrofit Kit Makes Sense

A retrofit makes sense when your tank is sound, the right size and the right pressure type. In that case you keep a working tank and pay only for the solar side of the system.

Take a household with a sound 200L electric geyser. They weigh the 200L solar conversion kit against the listed 200L high-pressure solar geyser, then add each installer’s labour quote before choosing. The kit is the cheaper starting point, and the labour quotes show whether that saving holds.

When a Full Solar Geyser Is the Better Buy

A 150L geyser that has started leaking from its tank is a replacement case. A conversion keeps that same tank in service, so you would be fitting solar to a tank that is already failing. The same goes for a tank that is too small for your household or clearly near the end of its life.

Here is how each kit compares with its matching complete unit on the listed prices:

Size Conversion kit Complete high-pressure solar geyser
150L around R13,451 around R16,332
200L around R15,449 around R19,325
300L around R19,482 around R28,085

The listed gap is around R2,900 at 150L, around R3,900 at 200L and around R8,600 at 300L. Only the complete unit brings a new tank, and that is what the extra money buys.

The gap also isn’t the final difference. Installation costs differ by job, so compare full quotes, not shelf prices. When the saving is small and your tank is old, the complete unit is often the safer buy.

Solar Geyser Conversion Installation: Process and Timeline

Installation follows a fixed order, and each step depends on the one before it. Expect it to run like this:

  1. Site check. The installer confirms capacity, pressure type, tank condition and roof access.
  2. Kit matching. The kit is matched to your tank.
  3. Isolate and drain. Power and water are shut off and the geyser is drained.
  4. Fit the collector. The solar collector goes in and the pipework is reconnected.
  5. Electrical checks. The electrics are tested and a certificate is issued.
  6. Commissioning and handover. The system is filled, tested and explained to you.

Timing depends mainly on roof access and any tank repair. A roof that is easy to reach keeps the job short, while awkward access or a repair on the existing geyser stretches it.

Ask for a scheduled date in the quote, not a vague “next week”. A written date makes it easier to hold each installer to the same standard when you compare them.

Not everyone who can handle a spanner should do this fit. Read installer versus handyman for geyser fitting before you decide who gets the job, because the electrical certificate and the pressure work are the parts that matter.

Solar Geyser Retrofit Cost and Payback on Your Existing Geyser

Reusing a sound tank keeps your upfront outlay below that of a complete unit of the same size on the listed prices. That is the main money argument for a retrofit, and it holds only while the tank is worth keeping.

Your solar geyser retrofit cost is the kit plus labour and any repairs. Take each of those from itemised quotes, not from estimates.

Working Out Your Payback Period

Simple payback is installed cost divided by the yearly reduction in the water-heating share of your electricity bill. Installed cost means kit, labour and any repairs.

The result depends on three things: how much hot water you use, your tariff and how much sun your roof gets. For that reason, no single payback figure applies to every household, and any article that gives you one is guessing.

Electricity tariffs have trended upward in recent years, which helps the case for solar. Even so, a conservative saving estimate is safer than an optimistic one, because you can plan around a pleasant surprise but not around a shortfall.

This kit will not take your bill to zero. The electric element still tops up the water when the sun doesn’t, so the saving is a reduction and not an end to heating costs.

Getting an Itemised Conversion Quote

A quote you can compare line by line starts with good information from you. Before you ask anyone, gather:

  • the tank’s capacity, read from its rating label
  • its age
  • its pressure type
  • roof access, including how you reach the roof
  • a photo of the unit

Ask each installer for a quote that separates the kit from labour and extras. With the kit, labour, pipework, electrical work and repairs on separate lines, you can see where two quotes really differ. How to compare installer quotes walks through that process step by step.

When you have your tank details, open the Apollo kit page that matches your size and request an itemised conversion quote through the site. Send the capacity, age, pressure type and a photo, and we will take it from there.

Frequently asked questions

Can you convert a normal geyser to solar in South Africa?

Yes, if the existing electric geyser suits a kit. Its capacity has to match one of the Apollo sizes from 100L to 300L, its pressure type has to suit a high-pressure kit, and the tank has to be sound. An installer checks all three on a site visit before quoting.

How much does it cost to convert a geyser to solar?

The Apollo kit alone runs from around R11,825 for the 100L to around R19,482 for the 300L. Installer labour, pipework and fittings, electrical work with its certificate, and any repairs to the existing geyser come on top. The installer’s itemised quote gives the real total, and the product pages hold the current kit prices.

How much does it cost to install a 200L solar geyser in South Africa?

The 200L High Pressure Solar Geyser Conversion kit is around R15,449, and the complete 200L high-pressure solar geyser is around R19,325, before installation. Labour and extras vary by job, so ask for a quote that separates them from the unit price. The conversion route only works if your current 200L tank is sound.

200L high-pressure solar geyser

How much does a 100L solar geyser cost in South Africa?

If you already own a 100L electric geyser, the 100L High Pressure Solar Geyser Conversion is around R11,825 for the kit. That price excludes installation and any repairs to your tank. Confirm the current figure on the product page, because prices move.

100l Apollo Solar Technology high pressure solar geyser

Share this guide
Facebook WhatsApp
Practical plumbing support

Need help with the problem described in this guide?

Speak directly to our team for clear advice, a free quotation and professional plumbing assistance.

Call 067 895 4361 Message on WhatsApp

Join the conversation

Your email address will not be published. Comments are moderated to keep the discussion useful and respectful.